| Author |
Message |
    
Fastxb12r
| | Posted on Saturday, May 30, 2009 - 06:59 pm: | 
|
Nillaice man I want to thank you for all the pics and measurements and taking the time to do them.If your ever in fort myers florida the drinks are on me.
Nillaice Just so you know krylon bought out VHT and is changing all their formulas over.From my experience VHT has better formulas than krylon other than their plastic stuff.So if you want some VHT you better get it while you can.
Ourdee funny you should mention that the source I am getting my cherry bombs from have screw on type tip you can get for easy change.I wont use those more than likely I will T.I.G. the pipes but since you mentioned it they would be good for what you are saying.I wouldnt think using two different size pipes wouldnt be good on the motor as then your getting two different back pressures????I am no expert so I could be wrong.... |
Fastxb12r
| | Posted on Saturday, May 30, 2009 - 07:05 pm: |
|
Nillaice im going to the Swamp Fest motorcycle rally tonight so ill have the pics of the bike up later tonight or in the morning....Depends on what gets drunk. |
Fastxb12r
| | Posted on Sunday, May 31, 2009 - 09:54 pm: |
|
http://www.badweatherbikers.com/buell/messages/327 77/464137.html?1243813300 |
Pogue_mahone
| | Posted on Sunday, May 31, 2009 - 10:24 pm: |
|
hey hank has 2 in mandrel bent tubes/elbows and clamps if u need any.and can ship to you
www.hanksvillehotrods.com in mild steel and aluminized steel too for corrosion preotection.
flowmaster also has small (10 inch) mufflers too.good thing with flowmaster is no packing,just baffles so whatever tone u get,wont change over time very much.
scott |
Ochoa0042
| | Posted on Sunday, May 31, 2009 - 10:43 pm: |
|
do they come in stainless steel or something, i've been wanting to get one.. but now.... eek! |
Pogue_mahone
| | Posted on Sunday, May 31, 2009 - 10:46 pm: |
|
http://www.hanksvillehotrods.com/Projects/Performa nceExhaustProjects/SportBikesChoppers/tabid/585/De fault.aspx |
Fastxb12r
| | Posted on Sunday, May 31, 2009 - 11:21 pm: |
|
Pogue_mahone which part in particular are you talking about?
2.0” T304
Stainless Steel,
.065 wall
45 degrees
$29.22
90 degrees
$29.22
180 degrees
$33.96
U/J Bend (Combination 180 and 45)
$53.44
OR is it a custom part? |
Fastxb12r
| | Posted on Saturday, June 06, 2009 - 06:50 pm: |
|
Pogue_mahone do you have the part number or something.I posted a question above this one also. |
Pogue_mahone
| | Posted on Saturday, June 06, 2009 - 08:38 pm: |
|
sorry guys was afk--
my elbow is the mild steel 2 in 90 degree elbow
and the clamp i bought was the same kind as the stock one,but it is a 4 inch clamp in width. not the skinny original one inch one.
he had the elbows in a bin,no part number on them. shoot him an e mail or call during business hours and he can get you set.
scott |
