G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through May 27, 2009 » After putting bar end mirrors on what did you use to fill in the holes of the stock mirrors « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Badbuell08
Posted on Thursday, May 21, 2009 - 08:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
I need to know what would look good on a white and blue 08 bolt to fill the holes of the stock mirrors after putting bar end mirrors on

thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Jeli
Posted on Thursday, May 21, 2009 - 09:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
check out this posting, lots of ideas
http://www.badweatherbikers.com/buell/messages/327 77/461097.html?1242785842

i went to my harley/buell dealer and ordered some plugs for the hole. the part number is listed in the above post. cost me $1.90
Top of pagePrevious messageNext messageBottom of page Link to this message

Altima02
Posted on Thursday, May 21, 2009 - 11:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
lowes have auto fastners. some nissan push caps fit perfect. had them for 3 years now. like 50 cents
Top of pagePrevious messageNext messageBottom of page Link to this message

Wardamneagle
Posted on Thursday, May 21, 2009 - 11:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
The CRG ones I have came with plugs
Top of pagePrevious messageNext messageBottom of page Link to this message

Vortec57
Posted on Friday, May 22, 2009 - 12:07 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
i put in some nice buttonhead stainless bolts.
soon i'll flip them over for my spiked "pike nuts" and have spikes on them
Top of pagePrevious messageNext messageBottom of page Link to this message

Juniorkirk
Posted on Friday, May 22, 2009 - 02:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
http://www.americansportbike.com/shoponline/ccp0-p rodshow/9182.html
Top of pagePrevious messageNext messageBottom of page Link to this message

Boliver
Posted on Friday, May 22, 2009 - 07:48 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
I bought a mixed assortment of vacuum caps.I used two long black ones and just stuffed them in there flush.You do not even notice the void.ten cents each.
Top of pagePrevious messageNext messageBottom of page Link to this message

Nillaice
Posted on Friday, May 22, 2009 - 09:54 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
i put what little bit of self respect i had left in one, and my last scrap of dignity in the other.

but the damn thing shakes so bad that it all fell out
Top of pagePrevious messageNext messageBottom of page Link to this message

Al_lighton
Posted on Friday, May 22, 2009 - 11:43 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
The CRGs don't come with the mirror hole plugs unless you buy them from American Sport Bike. We put them in the box when we receive them from CRG. But that is for the Lightnings and Ulys and such on the threaded handlebar perches.

The original post in this thread was referring to the mirror mount location on a firebolt, not the perches on a lightning. Someone already posted a link to the Mirror Block off plates, that is a clean solution. I've also seen plain bolts, spikes, and even just a couple tie wraps.

Al
Top of pagePrevious messageNext messageBottom of page Link to this message

Miko_k
Posted on Friday, May 22, 2009 - 12:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
http://memimage.cardomain.com/ride_images/2/4833/4 881/24582440239_large.jpg
These screw match the ones on the windscreen ; )
Top of pagePrevious messageNext messageBottom of page Link to this message

Zatco81
Posted on Friday, May 22, 2009 - 12:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
MIKO--What turn signals are those?
Top of pagePrevious messageNext messageBottom of page Link to this message

Miko_k
Posted on Friday, May 22, 2009 - 02:50 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
They look good, but suck. Can't really see them from the front, visible @ 45* or more. Got them from eBay:
http://cgi.ebay.com/ebaymotors/2002-2008-Yamaha-YZ F-R6-R6S-R1-CHROME-FLUSH-LED-SIGNALS_W0QQitemZ2703 94289591QQcmdZViewItemQQptZMotorcycles_Parts_Acces sories?hash=item3ef4c16db7&_trksid=p4506.c0.m245&_ trkparms=65%3A15|39%3A1|240%3A1318
Top of pagePrevious messageNext messageBottom of page Link to this message

Jumpinjewels
Posted on Saturday, May 23, 2009 - 11:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
We used the plastic plugs from Lowe's. Work great
« Previous Next »

Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration