G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Geofg Posted on Tuesday, January 27, 2004 - 03:26 pm:        So I just received a set of Xenon bulbs I picked up on ebay and was thinking about putting them within the next day or so. Before I get elbows deep into it, are there any pitfalls I need to watch out for? Can I just pop the bulbs out of the back of the light housing (from under the rubber boot), or is it more involved than that? Thanks, Geof   Kaese Posted on Tuesday, January 27, 2004 - 04:09 pm:        I am assuming we are talking about a XBR. Not much more than that, if you can reach them. I had to remove the faring and the headlight bracket. If you have to do remove the bracket, I would recommend removing the brass reflector underneath the lens.   Geofg Posted on Tuesday, January 27, 2004 - 04:40 pm:        Hi Keith, Yes, an XB9R. I probably should have made that more clear. So, you pulled the fairing and headlight bracket off to give yourself more room, or just to see what was there? I'm hoping not to make this a bigger job than it needs to be, seeing as I don't really have any good space to do the work. The less disassembly necessary the better, in this case. Thanks, Geof   Bykergeek Posted on Tuesday, January 27, 2004 - 06:58 pm:        is it more involved than that? As long as you have small hands, that's it. I put some cheap Xenons in a year ago. I want to get some PIAAs this year.   Kaese Posted on Tuesday, January 27, 2004 - 07:05 pm:        My hands wouldn't fit in there. I put in the cheap Sylvainia's. I ordered a headlight bracket and plan to put in some Hella's when I get brave enough to do some carving.   Geofg Posted on Tuesday, January 27, 2004 - 11:30 pm:        cheap Xenons Ain't Ebay grand? Thanks for the corroboration, I'm hoping the extra output from the Xenon bulb will make the difference with the low beam. The high beam is plenty, but the low is downright dim. -Geof   Bad_ass_bolt Posted on Thursday, January 29, 2004 - 08:26 pm:        what is the new headlight bracket in reference to? is there a different bracket that u use with the piaa lights. when u say carving, are u referring to the larger diameter of the lights?   Kaese Posted on Friday, January 30, 2004 - 12:00 am:        Carving a headlight bracket is necessary because the Hella lights are a larger diameter by my guestimation is 1/4 to 1/2 inch. I think this is the link that has some pictures. http://www.badweatherbikers.com/cgibin/discus/discus.cgi If that didn't work, do a search on "firebolt headlight upgrades" and you shall see the thread will all the info.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: