| Author | Message | ||
     Thirty2vsvt |
Does anyone know where I can find turndowns for a 2" pipe? The kind I am looking for is the really short ones, like the kind that bolt to a full length car header. I don't have much room between the end of my muffler and the rear tire...maybe 4 or 5 inches. I would have some made, but this town is lacking a good exhaust shop. | ||
| H2owerker |
I hope this link works. Unfortunately there aren't any pictures of the turn down tips. | ||
| Nillaice |
my local autozone had some exhaust tips that i considered (briefly) welding on the end of my muffler | ||
| Thirty2vsvt |
hmmm from the measurements, it may work. If my pipes were 2.5 inches, I would have no problem finding something. Thanks for the link H2o. | ||
| Thirty2vsvt |
ya, I saw some at my zone store also, but they were a multi-fit type. They had 2 set screws that locked them down (I would have cut that end off anyway). They probably would have worked, but the diameter was way bigger than the 2 inches it said it was. |
