Author |
Message |
Rah7777777
| Posted on Thursday, March 05, 2009 - 02:37 pm: |
|
Hey guys! Thinking about getting the low suspension for my 03 XB9S. Anyone know what it will change up as far as my handling is concerned? I don't want my handling to get whacky on me, but like the idea of flat footing at stops!! Any info is greatly appreciated! Also if anyone would like to trade or sell there low suspension.... Let me know. Thanks! -Robert www.xblights.com |
Froggy
| Posted on Thursday, March 05, 2009 - 02:55 pm: |
|
Did you change the seat yet? The SL or SCG seat would help, and its the cheapest route for lowering the bike. |
Rah7777777
| Posted on Thursday, March 05, 2009 - 03:03 pm: |
|
Yea got the seat, it helps. But I got stumpy legs :-) |
No_rice
| Posted on Thursday, March 05, 2009 - 04:46 pm: |
|
besides lowering your center of gravity even more(good thing!) it wont really MESS up anything. a bit less ground clearance, and hard parts touch down will be a bit sooner but most people on the street would never notice that part. the ride will be a bit stiffer but not unbearable or anything. i mean, they did come that way from the factory i lowered one of my 9r's for the gf. works awesome. |
Rah7777777
| Posted on Thursday, March 05, 2009 - 08:44 pm: |
|
Very true No Rice! I have 1125 pegs on her and never scrapped them, but have scrapped the stock pegs before (the ones that had the 1 inch or so drop) one worry is scrapping something a bit sooner....it seems my damn boot always scraps in a good corner. I keep them tucked in all the way, but need to work on resting just my toes on the pegs in corners...... Think I might try and find the low stuff Any ideas folks? im kinda cheap.... any traders out there? |
Skinstains
| Posted on Friday, March 06, 2009 - 12:45 am: |
|
Ebay. Just keep watching and it will come. |
Diablobrian
| Posted on Friday, March 06, 2009 - 07:21 am: |
|
Ask around here periodically, you'll find someone willing to swap straight across eventually (I did and so have others) Do not forget to get the kickstand (all years)and the lower triple clamp assembly (04+) when you do the trade. The only down side I have experienced is a slightly harsher ride due to the shorter travel in the suspension. Not enough to worry me, but it is a bit different. |
Rah7777777
| Posted on Friday, March 06, 2009 - 07:47 pm: |
|
Thanks for all the feedback guys! What years can I swap with? I have an 03. |
Hogs
| Posted on Friday, March 06, 2009 - 07:55 pm: |
|
I wd. think 03,04 Low model xb9`s not sure if there was a 05 and up xb9 low models, iF so them too... XB12`s SCG 04, and up to 09 xb12`s SCG as well... Others correct me IF I am wrong here... |
Rah7777777
| Posted on Friday, March 06, 2009 - 09:00 pm: |
|
I now the fork sizes are different with all the 05's and up compared to the 03-04 years. Not sure I'd want to put the effort into swapping all that too! Plus I doubt anyone would want the smaller forks on there newer bike. But if anyone does........ Let me know :-) |
Hogs
| Posted on Friday, March 06, 2009 - 09:09 pm: |
|
04 ,05 and up xb12 SCG models are the same size as 03xb9 low models etc.. |
Hogs
| Posted on Friday, March 06, 2009 - 09:11 pm: |
|
Only the 05 R and S up models were bigger Dia. |
Diablobrian
| Posted on Saturday, March 07, 2009 - 07:31 am: |
|
If you have an 03 it's all good. All scgs/lows have 41mm forks like your bike does. You do not need to change triple clamps. All you need is forks, shock, and kickstand from any year scg/low. |
Bishopjb1124
| Posted on Saturday, March 07, 2009 - 01:24 pm: |
|
I just took a set of stock low forks off of the wifes bike, I need to make sure they are straight but definately interested in selling them. Jimmy |
No_rice
| Posted on Saturday, March 07, 2009 - 01:43 pm: |
|
I just took a set of stock low forks off of the wifes bike, I need to make sure they are straight but definately interested in selling them. that raises some red flags with me. what about the low suspension on the rear? you did swap that out to i sure hope?! but i guess i am assuming that you changed to a regular height fork... |
Bishopjb1124
| Posted on Saturday, March 07, 2009 - 03:00 pm: |
|
No Just went with 09 cg front forks going for the blacked out look. The reason I need to make sure they are straight, She hit a big pot hole this fall and the bike started pulling to the right, I blamed it on the forks and decided to replace them with the SCG forks. After taking the forks off and the steering head I found that the steering head shaft was bent. This is why I want to ensure the forks are straight before selling them. I don't want to accidentally rip anyone off by selling them bent forks. Hope this clarifies everything up a little bit. Jimmy |
No_rice
| Posted on Saturday, March 07, 2009 - 03:02 pm: |
|
sure thing, i just wanted to make sure! |
Rah7777777
| Posted on Sunday, March 08, 2009 - 12:36 pm: |
|
If they are straight....how much $$$ shot me an email at xblights@yahoo.com if your serious! THANKS!!!! -Robert |