| Author |
Message |
    
Ezblast
| | Posted on Friday, November 07, 2008 - 05:35 pm: | 
|
They are 1" at the middle - 7/8" at the control area - less angle than regular clubmans - Those are the CR bars and that is a Blast - lol - but the bar mounts will work for you as well.
http://www.motorcycle-superstore.com/2/9/192/4931/ITEM/Azonic-Universal-Oversized-Handlebar-Clamps.aspx
EZ
(Message edited by ezblast on November 07, 2008) |
Fromparis
| | Posted on Friday, November 07, 2008 - 06:05 pm: |
|
WOW, you guys are great!! Got all the info that I needed.
Have a great weekend!
Frederic |
Ezblast
| | Posted on Tuesday, November 11, 2008 - 04:09 pm: |
|
Buell Cafe Bars:
http://www.busters-accessories.co.uk/productinfo/M AP501645/Bars-And-Rests/O.E.-Replica-Handlebars/On -Two-Wheels
sorry - can't take the pic - different format, however, they where made for an M2, are 7/8" and are shallow bend not the usual cafe bend - so they should fit, at half the price of the Buell made units with no adapter needed and lock side to side - since they where made for Buell.
EZ |
Metalstorm
| | Posted on Tuesday, November 11, 2008 - 10:36 pm: |
|
Are Fat Bars 1"?
I am wondering because if so, perhaps Precision Engineering's clamp for using Fat Bars would also allow the use of the stock CR bars on an XB. |
Ezblast
| | Posted on Tuesday, November 11, 2008 - 11:38 pm: |
|
Yes |
Ducbsa
| | Posted on Wednesday, November 12, 2008 - 06:21 am: |
|
Do our angled clamps make those Azonics not usable? |
|
