G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Ironken Posted on Saturday, October 04, 2008 - 08:36 pm:        O.K. got my TPS reset no prob, but, I cannot get the AFV to reset. I go to the Active Settings screen and click on the AFV&IAC tab and perform the re-set. It says Re-Set. I then go to the meters screen and create a bar for the AFV and it shows 84.7 even after the reset. I had no options to choose what to re-set it to. Also the TPS % open after the re-set is 6.7%. Is that o.k.? Any help would be greatly appreciated....Kenny (Message edited by ironken on October 04, 2008)   Jos51700 Posted on Sunday, October 05, 2008 - 10:54 am:        6.7 is kinda high. What is your TPS setting in degrees? Don't worry about resetting AFV. It will reset itelf after a moderately paced ride.   Ironken Posted on Sunday, October 05, 2008 - 11:04 am:        The bike isn't with me, I'll check it out in degrees when I get back over to it. Thanks....Kenny   Slaughter Posted on Sunday, October 05, 2008 - 11:23 am:        OK - for TPS reset, are you unscrewing the idle adjustment ALL THE WAY and then snapping the throttle shut a few times BEFORE re-zeroing? With the butterfly totally closed (at ZERO), you will usually feel it "stick" when you open it again with the throttle. It has to "know" where actual zero is BEFORE you use the adjust screw to set the idle back up. (Message edited by slaughter on October 05, 2008)   Ironken Posted on Sunday, October 05, 2008 - 01:50 pm:        Got the slight sticking in the throttle body before the reset. With the recommended starting point the idle was at 850 rpm. It took 6.7% to achieve + - 1100 rpm. This is with the stock ecm. I have the race ecm coming tomorrow and will try again on it. I was using the stock ecm as a guinea pig. I can't find the option to reset the AFV to a desired % with the VDSTS software. The only option I can get is just to reset AFV. After resetting and opening up a bar for the AFV it still reads 84%. What am I missing here? I also got an engine trouble pop up after I started the bike, but, no codes would show up in the boxes????   Tailspining Posted on Sunday, October 05, 2008 - 05:47 pm:        The engine trouble pop up is a bug in the software. Happens often. What Jos51700 said about the AFV is right. After a 10 mile run while maintaining your RPM above 3500, the AFV will be set or re-learned.   Ironken Posted on Sunday, October 05, 2008 - 05:56 pm:        Tail...Thanks for the info.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: