| Author | Message | ||
     Rednismo |
THE SOCKET SIZES THERE TWO AND ALL KEY TOOL FRONT AND REAR BIKE AT WITH THE KEY I DONT KNOW WHAT SOCKET TO BRING HOME (Message edited by rednismo on August 28, 2008) | ||
| Akbuell |
Not sure I understand the question, but if you mean the axles, there should be a tool for that in the tool kit. Or use a 7/8in Allen wrench. Or the top of a 13/16in spark plug socket. | ||
| Ferocity02 |
7/8" for the axle, 3/8" for the axle clamp bolt. | ||
| Gentleman_jon |
Once you get the right tool, ( it is 7/8" allen wrench), kindly note that the threads on the front wheel are reversed. This is indicated by an arrow on the fork. | ||
| New12r |
I DONT KNOW WHAT SOCKET TO BRING HOME Bring em all home then?? shees.... The pinch bolts on the front are 1/4 inch, the pinch bolt on the rear is 3/8, the axle nut tool is a 7/8 inch. Most fasteners on the Buell are standard, a couple are metric. | ||
| Rednismo |
cool thanks all | ||
| Gentleman_jon |
Shaun, Once you get your tools lined up, but before you attack your bike, you might want to get a copy of the shop manual. The rear wheel removal is quite easy to do, but the procedure is a little different from most bikes. Same is true for the front. There is probably some information on what do do in the Knowledge Vault on this site. |
