G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   08_xbss Posted on Saturday, May 31, 2008 - 08:56 am:        Just wondering where the idle screw is on the 08 xb is apparently its meant to be between the front barrel and the air scoop on the left side i cant see it any ideas ?   Barker Posted on Saturday, May 31, 2008 - 09:22 am:        sounds like your looking in the right place look up towards the frame.   08_xbss Posted on Saturday, May 31, 2008 - 09:38 am:        I even took off the air scoop and nothing just a wiring harness and a plug that has a red end cap with 3 rubber type lugs , not sure if its somewhere else on the 08 as per previous models ?   Jcbikes Posted on Saturday, May 31, 2008 - 10:11 am:        No idle screw on the 2008 from what I have heard. ECM controlled.   Bartimus Posted on Saturday, May 31, 2008 - 11:13 am:        "No idle screw on the 2008 from what I have heard. ECM controlled." That is an accurate statement. I too looked for quite awhile before looking in the manual. I still think the idle is too high and have been looking for ways to adjust it through ECMspy.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: