Author |
Message |
08_xbss
| Posted on Thursday, May 29, 2008 - 06:35 am: |
|
Hi just wondering if anyone has fitted a jardine muffler to an 08 xb ive been told by the dealer that the engine light will remain on also that the bike will run lean your thoughts would be appreciated |
Glitch
| Posted on Thursday, May 29, 2008 - 07:15 am: |
|
The light won't come on as long as you leave the exhaust valve actuator in place. The bike shouldn't run lean, the DDFI2 should be able to compensate. |
08_xbss
| Posted on Thursday, May 29, 2008 - 08:37 pm: |
|
Does you mean just disconnect the cable and leave it connected to the bike !Have you tried this yourself or no of someone who has ! |
Rednismo
| Posted on Thursday, May 29, 2008 - 09:03 pm: |
|
i have pipe on my 08 xb 12 its also jardine gp1 sound good hurt low end and i dont have check engine light on |
08_xbss
| Posted on Thursday, May 29, 2008 - 09:21 pm: |
|
Just curious what did you do with the cable , just left it connected or took it off appreciate your thoughts |
Bartimus
| Posted on Thursday, May 29, 2008 - 11:17 pm: |
|
??? I have an '08 XB12XT, I've installed a Jardine exhaust on it. I removed the cable completely, since there was nothing for it to connect to. Bike runs fine, I had to do some fine tuning with ECMspy to get ride of the deceleration popping. |
08_xbss
| Posted on Friday, May 30, 2008 - 01:58 am: |
|
Thanks for the info |
08_xbss
| Posted on Friday, May 30, 2008 - 08:29 am: |
|
Just wanted to let you know i have fitted the jardine today,sounds great only pops when backing off hard otherwise excellent the only thing i noticed was rev's seen to fall slower to idle. Thanks for all your thoughts idles at about 1ooo rpm |
08_xbss
| Posted on Saturday, May 31, 2008 - 07:15 am: |
|
Hi Bartimus just a question regarding ECMSPY and the fine tuning firstly i have the same problem you had before your tuning can you tell me where i can get ecmspy and is the process easy to follow ? |
Xbswede
| Posted on Saturday, May 31, 2008 - 08:14 am: |
|
Right here. http://www.ecmspy.com/download.shtml You will also need to make a cable or buy a ready made cable. http://www.deutschconnector.com/cgi-bin/store/agor a.cgi?xm=on&product_id=902 You can save yourself $20 if you make it yourself. Then you will need the USB drivers. http://www.ftdichip.com/Drivers/VCP.htm |
08_xbss
| Posted on Saturday, May 31, 2008 - 08:36 am: |
|
Thanks ! |