| Author | Message | ||
     Wantxbr |
Anyone know where to get different Dash Faces? I've tried PDGMoto But they only have one listed and its in Kmh. I've tried the contact link but no response. http://www.pdgmoto.com/ Any other sites available? | ||
| Damnut |
What are you looking for? I have an extra "Clean" faceplate that might be available. Contact Typeone here on BadWeb. He owns PDGMoto. | ||
| Wantxbr |
I was wanting the Flame MPH, but thanks for the offer. I like the speedo layout better. I'll contact Typeone. Thanks for the help Damnut | ||
| Damnut |
Shit now that I look, I actually have the Flame one not the clean. | ||
| Firebolt32 |
I've installed the bomb. Says "scorch the streets." | ||
| Wantxbr |
scorch the streets? Where'd you get that one? | ||
| Firebolt32 |
I have to do some looking. It was from a link posted here. You have to do some playing with Infraview to get it sized correctly. | ||
| Firebolt32 |
michaeldcausey.com/ipanel It came from this thread. http://www.badweatherbikers.com/buell/messages/32777/332392.html (Message edited by firebolt32 on May 20, 2008) | ||
| Wantxbr |
Are you supposed to print these out? Aren't the stock ones made of some thin laminate or plastic? Damnut If you wanna get rid of that dash face let me know. Typeone isn't sure when he's going to have another set made. (Message edited by WantXbr on May 20, 2008) | ||
| Damnut |
I'm on the fence about selling it. I have the Hooligan one on my bike now. I bought the Flame one just in case I needed one with numbers later on because I gave my stock one away to DiabloBrian. Before I get flamed by my riding buddies, let me offer it to one of them first. Before selling something we usually ask the group if anyone wants it before getting rid of it. Sound good? | ||
| Firebolt32 |
What I did was resize it to fit. I used Kodak Photopaper and printed it out. Let the paper sit there for a minute because the ink will still be wet. Looks great....I fuzzed it up just a little to show the affect of the numbers kinda melting. I'm pulling this one when I check my light housing to throw a black and white colored one on since my bike is no longer red.  | ||
| Toona |
I've got a PDG Hooligan face available if someone is interested. PM me. Here's a clickable link to the DIY dash faces. You will need Photoshop to edit them. (edited to fix link) (Message edited by Toona on May 20, 2008) | ||
| Retrittion |
I run this one -- I got the last one actually.  Really like it compared to my old stock one -- much easier to read. | ||
| Wantxbr |
Before I get flamed by my riding buddies, let me offer it to one of them first. Before selling something we usually ask the group if anyone wants it before getting rid of it. Sound good? Sounds Great Thank You FIrebolt32 does the light shine through the paper at night? I thought photo paper was dense and didn't allow much light through. Retrittion That Face was my second choice but Typeone is out of them all except a Flame KPH. Toona I myself am going to pass, I need something that will tell me how fast im going. Too many cops around my area itching to hand out tickets. Now me being on a faster bike I can't take the risk. | ||
| Retrittion |
heh, get the flame KPH one -- be original. the conversion is easy and it will further confuse anyone who looks at it -- just black out/re-stencil the KPH to a MPH and then laugh at the confused looks. "Whats your top speed?" "205-210" "Really!?!" "Yep..."  | ||
| Firebolt32 |
The light shines through it fine. | ||
| Ft_bstrd |
 Just to be mean. Hope you find one. Love mine. | ||
| Wantxbr |
You Bstrd :P | ||
| Damnut |
Brett..... It's looking like no one from my group is biting. I'll give them till the end of the today before making the deal with you. How does $60 shipped sound? | ||
| Damnut |
I'm leaving for vacation in ~9 hours. PM me. | ||
| Wantxbr |
How does $60 shipped sound? Sounds like $5.00 more than PDGMoto was asking. PM sent (Message edited by WantXbr on May 22, 2008) | ||
| Damnut |
Get it from PDG Moto then.  I'm not going to lose any money on doing someone that I don't know a favor. I paid $55 for it so I'm not going to charge you the same then pay for shipping myself and lose money shipping this to California from Massachusetts. I wasn't actually looking to sell this, I figured that I would do a BadWebber a favor. This is brand new and has never been installed. Remember.... this is a part that is not available any more. Have fun finding one. | ||
| Firebolt32 |
Get em Jim... | ||
| Wantxbr |
Nice attitude from both of you. PDG Moto says $55.00 SHIPPED. Wheres this extra $5.00. Thought you'd do the same, But instead I get an attitude. Thanks anyways. i'll just make it myself. | ||
| Rpm4x4 |
Wheres this extra $5.00. To ship it to you. Its $5. whopdedo. | ||
| Damnut |
Yes I paid $55. If I charge you $55 and ship it to you then I lose money for doing YOU a favor. No attitude, just facts. I figured 5 bucks was more than a fair price for shipping, my time, gas and a padded envelope. All the best on making one!! | ||
| Ft_bstrd |
Don't be a bitch about it. Do you want the face or not? They are limited edition. There are no more coming. Geez. Some people. Damnut, I'll buy it if $60 is too much. | ||
| Js_buell |
Well guys he is not actually loosing money if he sell it 55$ shipped since thats what he paid. That just mean he paid something like 55 for the dash face plus 5 shipping so I can see the point where there is a 5$ extra charge here but at the same time it is the only one available and thats life, demand create inflation and in this case the 5$ extra is nothing really unless you prefer to wait until PDG get a new batch made; which can take a while. If you want it now suck it up and pay the little extra and it done you have your new dash face. | ||
| Ft_bstrd |
The $5 extra covers the next leg of shipping. An unused face place of limited edition is what we are looking at. | ||
| Buellinachinashop |
what's the little green light at the bottom of the last pic Fat? |
