| Author | Message | ||
     Randomchaos |
Well, got my traction grips installed today. I was a little surprised at how easy it was! Here is the before and after shot of the left grip.  Haven't ridden it yet with them on. Gonna give them a good amount of time for the glue to setup. From just sitting on the bike though, I can tell already that I'm going to love them  | ||
| Old_man |
The most comfortable grips I've tried on my Buell. I've tried several. | ||
| Johntman |
best mod under $20. you'll love 'em. they should leave the factory with them on. | ||
| Retrittion |
Got them, love 'em, cut out the ends to fit my Dark Horse Moto barends and called it good. The stockers are just to thin and small. | ||
| Timo31 |
Put these on 2 weeks ago. Big improvement over the stockers. | ||
| Kyrocket |
Had them several years now. Wouldn't take them off for nuthin'! | ||
| Ttags |
if you two finger the clutch for wheelies, does the larger grip interfere? | ||
| Spacecapsule1 |
lets see the brake lever side. i just installed mine and there's a huge gap between the grip and the control housing..... | ||
| Randomchaos |
I will take a shot of the throttle/front brake side for ya this evening and post it up. I know mine has maybe 1/10th of an inch gap. Seems normal since the grip is attached to the throttle tube, and it needs room to twist without too much friction. | ||
| Spacecapsule1 |
Thanks. Mine has a 1/4 inch gap. I know a small gap is normal, but I could stick an ink pen in mine..... I had traction grips on my Blast and they weren't like that.... I guess the factory set the grip wrong on the throttle side? Dang.... duped again! | ||
| Randomchaos |
Here are the pics for ya.   | ||
| Spacecapsule1 |
Thanks Geoff. |
