| Author | Message | ||
     Zpyro |
my airbox cover took a hit in the wreck, enough to kinda squish down the air filter and break all the tabs on the air box. it also damaged the cable that goes to the (i think) exhast servo up top. not the electrical wires, but the cable like bicycles have on for the brakes. anyways, the little adjuster lookin thing down by the base of the airbox and the frame is broken, as well as the plastic piece on the servo itself where I think the adjusting/lock nuts go. would the bike not run properly like this? would I have to replace the whole servo because of the tab that's broken off of it? what about the cable, do I have to replace the whole thing? | ||
| Zpyro |
 (Message edited by zpyro on April 27, 2008) (Message edited by zpyro on April 27, 2008) | ||
| Samiam |
Dude if you still need it when I get back to the 'States in June from my deployment I'll be glad to send you mine. I have an aftermarket exhaust so I don't really need mine. -Sam | ||
| Jpb |
I did a conversion as well and removed my entire cable...it's yours if you are still in need. Send me a PM if you want it. |
