G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Hellcat_customs Posted on Sunday, March 16, 2008 - 12:27 am:        You guys are probablly tired of this question... I have a Tungsten E Palm with a mini USB cable... I want to open the cable and use a connector from the shop to make a cable that will interface between the Palm and the ECM.... I use DirectLink and a Laptop for tuning at the shop but ECMSPY interests me and allows me other options like using the Palm rather than a Laptop... can anyone tell me what the D+ and D- pins for the usb represent? I need to know which one is my TX to the ECM and the RX to the ECM...   Id073897 Posted on Sunday, March 16, 2008 - 04:05 am:        can anyone tell me what the D+ and D- pins for the usb represent? I need to know which one is my TX to the ECM and the RX to the ECM... USB_D+/D- are the USB data lines. Neither of these could be used to talk to the ECM. You have to connect the pda's RX/TX lines instead. Regards, Gunter   Hellcat_customs Posted on Sunday, March 16, 2008 - 04:34 am:        Thanks Gunter, I just realized that the Tungsten E and the E2 have different connectors on the PDAs... so I guess I gotta go get a E2 in the AM to make this all work... Which pins on the E2 go where?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: