| Author | Message | ||
     Mikexup |
 Don't know if the photo is going to show up..if it does I need suggestions as to how and where to relocate turn signals. | ||
| Mikexup |
The photo did show up. This is kind of the mock up stage, I haven't taken it out and tested anything but I'm sure it will be ok. The shield can be taken off and put back on in a matter of seconds, but need some ideas of what to do with the turn signals. | ||
| Xb9er |
good thing, do yourself a favor and take it off. Its a buell man, not a road king | ||
| Bartimus |
Its the beginning of a baby ULY. | ||
| Eicas |
I say form follows function, if it works for you, - leave it on and enjoy. | ||
| Cityxslicker |
get a set of led flasher strips from the local hardware store and run them on the outside front face of the hand guards. They will end up in the spot where my reflective tape is on my bike. Gives you good visibility and wide separation so that maybe the cagers will see you | ||
| Ustorque |
slicker PM comin your way | ||
| Bcool83 |
Mike that doesn't look that bad - would be great for touring on the XB. What is that screen originally from? | ||
| Mikexup |
I'm going to rethink the whole thing again, black powder coat all brackets, and mounting hardware to where it's not so noticeable. Bill the shield was originally on a Victory SC. |
