| Author | Message | ||
     Bo_sox |
I don't know if many of you have paid much attention to one of our sponsors, but much gratitude must be given to a company producing high quality products for Buells in an out of the way place called Kalispell, Montana! I've was looking for a set of black brake pedal and shift lever for my '06 XB12Ss when I came across their add on our forum. Needless to say I liked what I saw and ordered a set of their black foot pedals. I received them quickly and was blown away by their quality, fit, and finish. These are HIGH quality pieces of equipment and should not be overlooked by anyone wanting to upgrade the look of their Buell! I installed them this evening and they fit on the bike better than stock and looked 10X better. Piece of cake install with zero problems or fitment issues. I haven't read of too many people raving about these guys, but remember we need to support those who support us. Keep the manufacturers of hard to find aftermarket Buell parts alive and well. Do yourself the favor and check these guys out. Dynamite job Precision Engineering!!! Thanks, Bo Sox | ||
| 984gasm |
Just took a look at their site and the shifter and brake pedal are pretty sharp looking. Wish they had some larger pics on their site though... http://www.preeng.com | ||
| Old_man |
I have their bar risers, they're perfect. The make my XB9S a much more comfortable ride for this old man. | ||
| Ft_bstrd |
I have their fat bar conversions and LOVE THEM!  They are a fantastic company to deal with. Andy is great people. I had a small issue, and he fixed me right up. I would use them again in a heartbeat! | ||
| Dbird29 |
Maybe they could produce Steve's Firebolt headlight conversion. | ||
| Tq_freak |
I just got there brake and shifter for Christmas and the quality is absolutely amazing!!! I can wait till I can get home and put them on. | ||
| Bads1 |
I've had the shifter and brake levers on my bike pretty much all season. They are of excellent quality and Andy stands by his product. He is also always open minded for idea's for products. These shifters are of equal quality if not better then Cross Roads or Banke and I have owned both. Give Andy a call you will have NO disappointments | ||
| Brickcop |
I also have their fat bar risers and brake and clutch lever for my 2007 XB12Ss in black and they are high quality first rate products that are built tougher and better looking then the stock parts. | ||
| U4euh |
Just ordered the bar risers! Thanks for the link and heads up. | ||
| Comeauzee |
I just ordered the shifter and the brake and the brake resevoir cover, can't wait to get them. | ||
| M_singer |
Prices seem very reasonable too. Kalispell, Montana is one of the most beautiful places that I have ever seem! | ||
| Ft_bstrd |
I have an email in to them. I am probably going to order the top pieces for the "Slim" fat bar clamp. The only real beef I have had with the "beefier" version is that the flat chunk of machined aluminum slings a nasty glare occasionally. I would definitely recommend the black anodize if you go with the beefier clamp. | ||
| Bake |
I put a set of his Uly 1 1/8 risers on my R and used a pair of Pro Tapers. His stuff arrived fast and real nice quality. | ||
| Xring60 |
Thanks! I am really excited that you have all had a good experience with us! We are a group of folks who all REALLY care about the end result and what the customer thinks of our product whether it be positive or negative. Again, many thanks from everybody at Precision Engineering! Keep tuned into to our website as we will be adding some products to our line up Andy | ||
| Ft_bstrd |
Thanks Andy for chiming in. You are part of the equation that makes PE good to work with. There seems to be a certain trait of sponsor we see here. Skully, Trojan, Al, Rah7777777, Odie, Typeone, and you are all great people to work with. Thank you for being a BW sponsor. |
