G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mesafirebolt Posted on Tuesday, November 27, 2007 - 02:16 pm:        Ok, I keep hearing everyone talk about it, how does it work, what do you need to make it work, What is this thing?   Punkid8888 Posted on Tuesday, November 27, 2007 - 02:26 pm:        do a search there is tons of info about it through out the site.   Mesafirebolt Posted on Tuesday, November 27, 2007 - 02:27 pm:        I did but I dont see anything that says "How what and with"   Glitch Posted on Tuesday, November 27, 2007 - 02:44 pm:          Mesafirebolt Posted on Tuesday, November 27, 2007 - 02:46 pm:        Thanks all, I'll just wait for my RACE ECM to show up this week, Thanks Andy!   Glitch Posted on Tuesday, November 27, 2007 - 02:50 pm:        More than I could ever type. I can't explain the ECMSpy because I don't want to mess with anything with that much potential disaster for me. I've played with other ECM tools and always end up going back to stock.   Swordsman Posted on Tuesday, November 27, 2007 - 02:51 pm:        1.) Download the free software from http://www.ecmspy.com/. Install it on a laptop. 2.) Download the full manual from http://www.steveturnbull.co.uk/buell/buellecmspytu ningguide.zip 3.) You'll have to make a cable yourself or purchase one online. The parts cost around $40 or so. I think the manual actually gives instructions on how to build one. If not, I know they're located throughout the web, even here on Badweb somewhere. 4.) Also download ans install the FTDI drivers (needed to operate the cable) from http://www.ftdichip.com/Drivers/VCP.htm . After that, you should be all set! There are some troubleshooting bits in the manual... I actually had some COM port issues that needed sorting out initially. Hope that helps! I got it just so I could do my own TPS resets. Definitely handy, and beats paying the dealer for such a simple job. ~SM (Message edited by Swordsman on November 27, 2007)   Mesafirebolt Posted on Tuesday, November 27, 2007 - 02:55 pm:        Cool, I'll try the TPS with my RACE ECM. If its got parts...I can build it...   Buelldyno_guy Posted on Wednesday, November 28, 2007 - 03:33 pm:        Went to http://www.ecmspy.com/ and tried to download, but got a message it was not available??? Has anyone else had any luck> ... Terry   Glitch Posted on Wednesday, November 28, 2007 - 03:38 pm:        Terry, try here. http://www.ecmspy.com/download.shtml.de   Jmor03 Posted on Thursday, November 29, 2007 - 11:19 am:        I found the download here http://www.buelletinboard.com/forums/showthread.ph p?t=3351 The second link for xp/2000 pc version will download and there is allot of other helpful stuff. I havn't used it for anything other then TPS reset, diagnostics and saved the info from my fuel maps and eprom. It worked great!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: