G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through November 05, 2007 » Rattling in the Dash « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Gschuette
Posted on Tuesday, October 30, 2007 - 01:24 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Is that what the instrument panel is called on Motorcycles?

Anyway there is this terribly annoying metallic rattle in the dash of my bike. I took the flyscreen off and tightened and wiggled everything I could find. Nothing seemed loose so I think something is vibrating against something else. It seems to get a little bit quieter as the bike gets warmer. On a side note my speedo died on the way to school just now. It started working on its own again just before I shut it off.

Sorry I did a quick KV search and didn't really find anything.

XB12Ss by the way 2006.

Thanks for any suggestions.
Top of pagePrevious messageNext messageBottom of page Link to this message

Gentleman_jon
Posted on Tuesday, October 30, 2007 - 06:56 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

It's always hard to diagnose a bike over the net.

I had a real bad rattle on my bike too.

It turned out to be two things at once. Really had me confused for a while.

The most common cause is the horn mount. The horn is mounted on a double spring cantilever that often fails.

In my case, I also failed to properly tighten my front brake caliper after installing new pads, and the noise was not unlike the loose horn. Had me pretty confused for a while, that's for sure.

Might want to check your steering bearings as well.

Usually a "goofy" speedo means an intermittent short somewhere. There was a good thread on intermittent shorts some time ago.

Here it is:

http://www.badweatherbikers.com/buell/messages/327 77/211173.html?1152707968

Please don't forget to let us know what the problem was when you find it, ok?
Top of pagePrevious messageNext messageBottom of page Link to this message

Glitch
Posted on Tuesday, October 30, 2007 - 08:23 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I found my rattle.
It was the key ring.
Funny as it is now, it took me several rides to find it.
It was just a clip-on thing, so I could clip the single bike key on my main key ring when I took the key out of the bike.
Sure made a racket though.
Top of pagePrevious messageNext messageBottom of page Link to this message

Cereal
Posted on Tuesday, October 30, 2007 - 09:05 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Put a louder pipe on it. No more rattle.

As for the speedo, take out the sensor, wipe it down, put it back. That has worked for many of us.
Top of pagePrevious messageNext messageBottom of page Link to this message

Barker
Posted on Tuesday, October 30, 2007 - 09:54 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

my headlights rattle.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ccryder
Posted on Tuesday, October 30, 2007 - 10:20 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

My brain rattles. Maybe if I get that loose nut behind the bars tightened up, my brain will quit making so much noise.



Neil S.
Top of pagePrevious messageNext messageBottom of page Link to this message

Corporatemonkey
Posted on Tuesday, October 30, 2007 - 10:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I was going nuts over a rattle under my flyscreen. After tightening everything it was still there.

It took me a month to find out I had a small pebble that had gotten back there. It was rattling around like a spray can marble.

I felt so stupid for not finding it sooner.
Top of pagePrevious messageNext messageBottom of page Link to this message

Freezerburn
Posted on Tuesday, October 30, 2007 - 11:32 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Same thing happened to me. It was the horn mount. It broke. Made myself a new one out of a stainless steel ruler!
Top of pagePrevious messageNext messageBottom of page Link to this message

Gschuette
Posted on Tuesday, October 30, 2007 - 11:41 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks for all the suggestions. I know it is hard to diagnose here but it has been there since I got the bike and it drives me nuts. Plus it is really loud and embarrassing. I think people hear it and proceed to think my bad ass scooter is a piece of crap. I will let you know if I find it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Rah7777777
Posted on Tuesday, October 30, 2007 - 11:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Same here with the keychain. after a while you don't even notice it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Mesafirebolt
Posted on Tuesday, October 30, 2007 - 03:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

My headlights rattled, I applied RTV to the attachment points, let it dry-no more rattle
Top of pagePrevious messageNext messageBottom of page Link to this message

Austinuu
Posted on Tuesday, October 30, 2007 - 04:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Once it was one of the headlight assembly's every other time (5) its been right after the wireform clutch cable holder breaks and rattles against the header.
Top of pagePrevious messageNext messageBottom of page Link to this message

Interex2050
Posted on Wednesday, October 31, 2007 - 02:24 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Assuming the speedometer assembly is attached in a similar fashion to the firebolt's, check the rubber grommet that are used in the mount holes... Mine wore out and the metal stocks were clanking against the mount.
As for the speedometer giving out...
Did both your speedometer and tachometer go out, but the info lights stay on?
If so check the ignition "barrel" wiring, although that applies much more to firebolts I imagine...
But its worth looking at...
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbrfirebolt
Posted on Wednesday, October 31, 2007 - 09:50 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

My '08 Firebolt has developed a "Buzzing" noise that sounds like it's coming from the dash area or below it. It's only got 850 miles.

No idea yet whats making it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Glitch
Posted on Wednesday, October 31, 2007 - 09:52 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Probably a vibration.
Top of pagePrevious messageNext messageBottom of page Link to this message

Mesafirebolt
Posted on Wednesday, October 31, 2007 - 10:24 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

my speedo mounts were worn too. Me being BROKE, i used aluminum washers clearanced for the tabs (you'll see when you look) to take up the space, still works great, been on for about 4K miles. Also as said before the headlights make a LOT of noise. RTV BAYBEEE
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration