| Author | Message | ||
     Ferrisbuellersdayoff |
Ok I bought an `06 upper inner air box. and I'm contemplating 3 ways I'd like to crack it open: 1.- Dremmel out the jailcell...  2.- Old muscle car with the wingnut holding the lid down...  3.- Put some white LEDs inside the airbox, and cut out either "Buell" or the Pegasus logo. And cover it with a translucid blue lid.  Now I got that Idea from a picture that was of someones non-translucid lid, where they cut out thebadge lines of the word "Buell", as seen in pic 4.  | ||
| Deadprez08 |
I'm really feeling the pegasus logo on both sides... PLUS the LEDs. Assuming your airbox cover is debadged and translucent, that'd look pretty badass I think. ~Dunte | ||
| Ustorque |
i'm a fan of the pegasus logo...but i wouldn't have a steady enough hand for that one, but i like it | ||
| Kyrocket |
+1 on the pegasus logos and led's. | ||
| Bartimus |
I agree with the Pegasus Logo | ||
| Ferrisbuellersdayoff |
I'm going with a translucent blue lid, what color LEDs? I'm thinking white would be my only option for best visibility. | ||
| Buellinachinashop |
Does your state allow you to run with these lights on? Otherwise it's alot of work just to have it sit around and glow? | ||
| Diablobrian |
The pegasus cutout gets the nod for style, but the hotrod wingnut method is probably the most functional. It all depends on what you are going for with your bike. I went with the wingnut style that isn't the right choice for everyone. |
