G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Xl1200r Posted on Wednesday, September 05, 2007 - 12:40 pm:        I have a remapped ECM in my bike to work with the Spec Ops muffler and open air box with K&N. I didn't do anything except remap the ecm and reset the air/fuel value. The bike now has a slightly oscilating idle - it goes pretty slowly, but drifts between 1000 and 750 rpm or so. When the idle is on the low side and I blip the throttle, it coughs and sputters. Also, it didn't do this until last night - but cruising at 60 (about 2900rpms) the thing just gave me a quick 1-time sputter, maybe 3 times spread over 5 or 10 minutes. Any thoughts?   Ryanhook Posted on Wednesday, September 05, 2007 - 12:52 pm:        I had mine remapped twice the first time it didn't take and gave me some problems too. but now it runs great.   Ftd Posted on Wednesday, September 05, 2007 - 02:17 pm:        go to knowledge vault and search "AFV creep" for threads on this topic   Xl1200r Posted on Wednesday, September 05, 2007 - 03:21 pm:        Ftd - I read the stuff about AFV creep. I'm using an American Sport Bike map, so I doubt this is the problem, but I'll plug in the laptop and take a look at what the AFV is. If I understand it correctly, anything between 95 and 105 is considerded good.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: