| Author | Message | ||
     Badlionsfan |
about to change my levers to pazzo shorties. is there anything i need to know or is it as simple as it seems. i can be an idiot sometimes and the obvious can escape me. just thought i'd ask b4 i made my life harder. thanks. | ||
| Ccryder |
You need an 8mm and 10mm wrench & socket. Just be careful that the plunger for the switches don't get bent or out of position. I had minimal slack in my clutch and was able to R&R the lever without much trouble at all. A little grease on the cable and furrel/ barrel will go a longs ways for cable life and ease. Some more on the bolt and any surface that can rub also helps. Adjust the slop in the clutch with the tension on the bolt/ nut. Enjoy. Neil S. | ||
| Badlionsfan |
we just adjusted the clutch cable a few weeks ago, so it should be good to go i guess. thanks for the reply. |
