| Author |
Message |
    
Bueller007
| | Posted on Saturday, May 05, 2007 - 09:28 pm: | 
|
How difficult is it to replace the face?
Anyone have some idiot proof instructions?? |
Diablobrian
| | Posted on Saturday, May 05, 2007 - 11:33 pm: |
|
On the website at the top of the thread there is a link to installation instructions near the bottom of the page.
This is my version.
Basically:
remove 3 bolts holding gages to dash assembly.
disconnect cable from gages (there is a latch under the rubber boot
remove 8 or so #2 phillips screws from the back of the gage face around the perimeter.
Then remove the 2 in the center holding the gages into the box.
now the trickiest part: pull the needles firmly but gently straight out of the gages.
Then just peel the face plate off of the housing. A hairdryer will help soften the adhesive.
re-assembly is just the reverse. |
Diablobrian
| | Posted on Saturday, May 05, 2007 - 11:34 pm: |
|
I just checked, the instructions on the web site are down right now. |
Typeone
| | Posted on Sunday, May 06, 2007 - 08:33 am: |
|
thanks for those quick instructions, Diablobrian.
sorry about the dead link, guys. i'll try to finish the install instructions today. wanted to take new photos but didn't get a chance yet. |
Typeone
| | Posted on Sunday, May 06, 2007 - 04:18 pm: |
|
FYI, I've created a full set of faceplate install instructions with photos. The link on the site in the 'How Do I Install It' section now works. http://www.pdgmoto.com
Thanks!
(Message edited by typeone on May 06, 2007) |
Diablobrian
| | Posted on Sunday, May 06, 2007 - 08:44 pm: |
|
Clinton's instructions are better than mine by far, and the pics rock!
Have no fear people,
(Rob Schnieder bayou accent)
you can do it....you can do it all night long! |
Typeone
| | Posted on Monday, May 07, 2007 - 09:37 am: |
|
great news! i've been talking with my printer this morning, they're going to work with me to allow more design variation in a single run using the same palette. this is a HUGE plus.
by the end of the day I should have detail on the additional variations that will be available... KPH will be one of them, as will a cleaner design without flames. |
Diablobrian
| | Posted on Monday, May 07, 2007 - 06:55 pm: |
|
sweet! I can't wait to see what you come up with! |
Jwhite601
| | Posted on Monday, May 07, 2007 - 11:41 pm: |
|
do the one that Rich posted, thats what i really want. |
Brad_buell
| | Posted on Tuesday, May 08, 2007 - 01:05 am: |
|
Can't wait to see the New designs!
Also....can't wait to order one! |
Typeone
| | Posted on Tuesday, May 08, 2007 - 07:38 pm: |
|
FYI, 4 designs will be offered in this first run, including a KM/H version. see site for detail.. .
_clinton
PDGMoto.com
(Message edited by typeone on May 09, 2007) |
Jwhite601
| | Posted on Wednesday, May 09, 2007 - 12:04 am: |
|
Please send me a hooligan when they arrive, Ive already paid, thanks man, this is awesome. |
Typeone
| | Posted on Wednesday, May 09, 2007 - 06:57 am: |
|
Jeff, why not get both?  thanks for the excitement.. .
I will have the final additional designs up on the site today. |
Damnut
| | Posted on Wednesday, May 09, 2007 - 08:09 am: |
|
Hey Clinton, If you get the hooligan at the same time as the one I ordered, I'll take that one. Let me know. |
Terrys
| | Posted on Wednesday, May 09, 2007 - 08:27 pm: |
|
I made a few concept's I thought Id share with you guys
I'm put'n these out there for anyone who would like to use them
Typeone ...love the ones you have done and cant wait to order one. If your interested you could have these to print for free.
I can post the EPS files if anyone is interested
|
Brewtus
| | Posted on Wednesday, May 09, 2007 - 08:40 pm: |
|
Terrys,
That first one kicks AS$!! I would buy that one! |
Typeone
| | Posted on Wednesday, May 09, 2007 - 09:14 pm: |
|
Terrys, lookin' good! thanks for the offer but i'm steering clear of anything that uses 'Buell', 'XB', etc. due to trademark violation. also keeping things very simple regarding color palette and graphics, clear numbers were really my only concern for this limited run (other than the hooligan option, of course) 
great work on your site too!! |
Brewtus
| | Posted on Wednesday, May 09, 2007 - 11:54 pm: |
|
Typeone,
I forgot to say THANKS for all the research and time you and everyone else has put into bringing another great product to all us Buellers! |
|
