Author |
Message |
Dogboy
| Posted on Friday, March 23, 2007 - 08:12 am: |
|
I've got a 12s with D&D,k&n,and stock 05 air box.Would going to the open air box make any difference?Don't know if that would make the bike run hot? Oh,my outer air box cover is a 06 with the holes by the gas cap....Thanks |
Tiller269
| Posted on Friday, March 23, 2007 - 09:38 am: |
|
If you go to an open airbox, you better do something with the fuelling as well. Otherwise you are going to be running a bit lean. |
Icon12r
| Posted on Friday, March 23, 2007 - 12:31 pm: |
|
I'd say spend $35 on a '07 airbox (buell opened them up quite a bit). It wont be as extreme as going to an open airbox, but would still make a difference. Though it sounds like a race ECM or a programmer would be the best bet. |
Ghalsey
| Posted on Friday, March 23, 2007 - 12:39 pm: |
|
Did you take the inner flange out from the left side of the bike? That opens it up quite a bit. |
Captnemo
| Posted on Friday, March 23, 2007 - 01:47 pm: |
|
I have an American Sport Bike open airbox kit that's cluttering up the storage area, if anyone' s interested. rodnut6@yahoo.com |
Humboldtblast
| Posted on Friday, March 23, 2007 - 07:33 pm: |
|
pmed ya |
Dogboy
| Posted on Friday, March 23, 2007 - 08:11 pm: |
|
Hey guys I do have the race ecm.so if I just buy the 07 air box lid,that will make a difference? But again I don't want to make it run to lean....right?or will it be OK.. |
Kowpow225
| Posted on Friday, March 23, 2007 - 08:20 pm: |
|
You'd be okay. The airbox mods don't make a significant change to the fueling requirements from what I understand. Go for it! |
Jammaster
| Posted on Friday, March 23, 2007 - 11:10 pm: |
|
I have an 07 XB9R Firebolt with a Drummer muffler, K&N air filter, and "ultimate air box kit" from Trojan Horse. The air box kit eliminates the snorkel and inner air box. I have the stock ECM and no TFI and far as I'm concerned the bike runs great! The air box kit definitely gave the bike a kick in the ass! |
Tq_freak
| Posted on Friday, March 23, 2007 - 11:31 pm: |
|
I got an 05, D&D, race ecm and filter....my advise. remove the snorkle and swiss cheese the holy hell out of the Inner box with a 1" hole saw and you'll be good to go. the hole saw is cheeper the the 07 inner and then it gives you something to do out in the garage too. |
Dogboy
| Posted on Friday, March 23, 2007 - 11:46 pm: |
|
Tq freak- when you removed the snorkle do you plug the hole,I think I've read that somewhere? also how do you remove the snorkle? Haven't even seen this thing.. |
Tq_freak
| Posted on Saturday, March 24, 2007 - 10:44 am: |
|
when you take he inner air box top off in the upper left courner where the pass thru to the left side air scoop is there is a rubber reducer to help quiet the intake noise for EPA reasons but it also impeads air flow, it takes a little muscle but just pull on it and wiggle it out. dont plug the hole up because you want the now larger hole to help feed the motor. If you pm me your address I will send you some pics, they are to big to compress down nicly to post. |
Dogboy
| Posted on Saturday, March 24, 2007 - 04:52 pm: |
|
Tq freak,thanks for info.opened box this morning and disposed the snorkle,going to go ride alittle later... |
Brineusaf
| Posted on Sunday, March 25, 2007 - 04:11 am: |
|
Jammaster - if you have an 07 you shouldn't have a snorkel. Thus your added fuel capacity compared to the older bikes. |
Jammaster
| Posted on Sunday, March 25, 2007 - 04:58 pm: |
|
Brineusaf- What I meant by snorkel was the funnel looking rubber thing between the airfilter. I thought thats what the 'snorkel' was but I guess not? The airbox kit is just a fixture that covers what I thought was called the snorkel. |
Kowpow225
| Posted on Sunday, March 25, 2007 - 08:09 pm: |
|
Jason, That is your velocity stack. Please don't take that out (unless your putting in a FAST system) |
Aj06bolt12r
| Posted on Sunday, March 25, 2007 - 08:52 pm: |
|
hey ghastley, whats the inner flange on the left side of the bike? I dunno what your talkin about. If you could possibly post a pic that would help out alot. Thanks |
Ghalsey
| Posted on Sunday, March 25, 2007 - 09:42 pm: |
|
I am talking about the same thing Tq_freak and others are talking about. Just the rubber thing that directs air from your left side scoop to your airbox. I think Tq_freak might be able to help with pics. Its pretty simple, just a bit of muscle, and it'll come out. |
Jammaster
| Posted on Monday, March 26, 2007 - 06:35 am: |
|
Kowpow225, No I didnt take it out. Like I said its just a cover that covers the inner part of the airfilter which includes the velocity stack (Now that I know what its called) |
Terribletim
| Posted on Monday, March 26, 2007 - 02:11 pm: |
|
Will the removal of that rubber thing require remapping the ECM or is it not that big an adjustment? |
Brineusaf
| Posted on Tuesday, March 27, 2007 - 05:43 am: |
|
I think what you're talking about is the "airbox base"? The velocity stack connects the intake with the filter. The snorkel is a rubber piece used to route air THROUGH the frame on the "older" model xb's. |