| Author | Message | ||
     Hackaday |
I was looking at the Rizoma, RRC, and Freespirits pulley covers on Trojanhorse. Any Badwebbers have better pictures of these installed? (and other options) | ||
| Snakedriver |
Hey Hack, Check this guys out. I dont know anything about them but I really like there cover. http://www.soetengadesign.com/Buell%20parts%20page .htm | ||
| Ronlv |
look at the freespirits one on my bike here http://www.badweatherbikers.com/buell/messages/327 77/260216.html?1172241422 | ||
| Thansesxb9rs |
checkout www.twobitchoppers.com not sure if they are on his webpage but he can make you one. | ||
| Trojan |
Rizoma (with Rizoma rearsets):  RRC (with Crossroads Performance pulley skin & Gilles rearsets):  Free Spirits (with Racing Motor pulley skin)  Both the Free Spirits and RRC designs need to be adapted slightly by removing (unbolting) a small piece at the top edge where you can see the row of small allen bolts in order to fit the 2006 on bikes. This is inorder to clear the oil lines on these models. | ||
| Hackaday |
Thanks everyone!!! [edit: deleted the stupid] (Message edited by hackaday on March 01, 2007) | ||
| Typeone |
for the Free Spirits pulley cover owners... did you have a weird issue with lower bolt? its tapered but the aluminum plate doesn't have a recess for it... plus my lower fairing hits the plate as well. seems odd. | ||
| Ronlv |
mine fit fine with no issues | ||
| Typeone |
ron, how about that lower bolt? does it sit flush with the plate? or sticks up a bit due to the taper of the screw head. fairing hitting might be a bent pipe bracket. my Drummer was pushed in a little when i got it way back. | ||
| Trojan |
for the Free Spirits pulley cover owners... did you have a weird issue with lower bolt? its tapered but the aluminum plate doesn't have a recess for it... plus my lower fairing hits the plate as well. seems odd. You may have received a 'rogue' one that had missed part of the machining process, as all of the FS pulley covers that I have fitted have had a countersunk plate to match the bottom bolt (see pic). We will also have a couple of new pulley covers available in the next couple of days. These are aluminim and will be available in polished, or anodised silver, black or gold. Made from 3mm aluminium they are in two styles.     I will post these on our web site with prices etc in the next few days  | ||
| Typeone |
You may have received a 'rogue' one that had missed part of the machining process, as all of the FS pulley covers that I have fitted have had a countersunk plate to match the bottom bolt (see pic). damn, that sucks. that's the feeling i had when i bolted it on, didn't seem right. guess i can just use a drill bit to sink it some. or located a flat-headed bolt. bummer. | ||
| Thelumox |
do i have to order the rcc front sprocket cover from trojan? are they sold here in the states? | ||
| Trojan |
We can send to the US no problem |
