G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Dongalonga Posted on Thursday, February 08, 2007 - 04:35 am:        i finally got around to dismanteling the back half of the Lightning to send it out to be powder coated. I stripped the right side rider's heel guard bolt and cannot get it out. First will a screw extractor be the best bet and where can I get two new bolts?   Rich Posted on Thursday, February 08, 2007 - 07:20 am:        Do you have a impact driver? If so, try to put the hex socket on it, and hit it. Can you Dremel a slot in it, and hit it with the impact driver? (Message edited by Rich on February 08, 2007)   Brineusaf Posted on Thursday, February 08, 2007 - 11:20 am:        did you try to heat it with a torch prior to attempting to loosen? DaveS can get you new bolts.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: