G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Boxxer3 Posted on Monday, September 11, 2006 - 07:54 pm:        I got a big problem, My flywheel splines (primary side) are wore alittle about .020-.022 the primary sprocket moves front to back when its on and not tight. Is this a big problem? Is this normal? its got 20,000 miles. Can I shim the splines to tighten it up? thanks for any help!!!!!   Boxxer3 Posted on Monday, September 11, 2006 - 08:05 pm:        Here is a picture of what it looks like, This isnt mine its a picture I found, Mines not as bad as this one.   Fullpower Posted on Monday, September 11, 2006 - 10:02 pm:        spose you could dimple them up a bit with a sharp punch, install with green (sleeve and bearing retainer) loctite. probably be fine for another 20K.   Bumblebee Posted on Tuesday, September 12, 2006 - 11:30 am:        This isn't a problem, yet.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: