| Author | Message | ||
     Oneway |
speedo quit working the other day about sametime started having trouble shifting,like it would get stuck in gear shifting down. any thoughts on this? i looked in kv | ||
| Hogs |
Oneway, You might want to keep an eye on this: http://www.badweatherbikers.com/buell/messages/3842/217439.html?1154971819 But it wd. have no bearing on your speedo, But hard downshifting is what happened in a flash on the wifes xb12scg, She also had to get a new primary under warranty , So looks like she is atleast the second one this has happened to or more, and the dealer is the only one that ever touched her bike so I rest my case. May be just a clutch adjustment in your case. Speedo may be the speed sensor which is common on the 9`s or some other plm. there.. Hope this helps Buddy... | ||
| Oneway |
i have'nt pulled the primary yet, but pulled the inspection cover off roadside and made sure it was not out of adjustment. but did see that bad casting or brake that was in the pic | ||
| Kootenay |
This probably has no bearing on the problem, but I had some trouble this summer during downshifts--turned out to be the shift linkage had come loose, and the end of the shift lever was contacting the primary case when I tried to downshift. My fault, for not tightening the linkage locknuts sufficiently after adjustment... | ||
| Oneway |
removed inspection cover and removed gizmo( dont know part name) to look at primary case seen no damage to case will pull primary tonight after work and see whats up | ||
| Oneway |
has anyone had a bent shifting fork if so what are the symptoms | ||
| Moboy516 |
I just had a similar problem, except it was on the upshift. I thought it was the shifter fork also, but it the clutch was in need of adjustment. After the clutch adjustment, I have ridden 1000 miles with no problems. | ||
| Sgthigg |
Hogs mine did the same thing too. 05xb12scg | ||
| Hogs |
Sgthigg, Hmmmm Interesting... |
