G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   The_new_guy Posted on Wednesday, July 05, 2006 - 10:30 am:        Hello everyone, I'm going to install my race ecm and I am wondering how the tps reset is done. Basically, I'm wondering where the buell tech needs access to do the reset. I don't want to install the ecm and then put it all back together if it's going to be taken apart again to do the reset. Should I leave it disassembled? Thanks, Gregg   Darthane Posted on Wednesday, July 05, 2006 - 11:04 am:        They access it through the diag connection tucked in where your front left turn signal is. No disassembly required. However, be aware that when you put the Race ECM in, your bike may not be rideable until you get the reset done. Mine wasn't, others were - it's a crapshoot.   The_new_guy Posted on Wednesday, July 05, 2006 - 11:36 am:        Thanks, I'm counting on it not being rideable. I know I'll try and run it though. I've been waiting too long.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: