Author |
Message |
Henrik
| Posted on Wednesday, June 28, 2006 - 02:11 pm: |
|
Can anyone with an XB-R do me a favor and measure the spacing between the mounting bolts. Center-to-center if possible. Thanks Henrik |
Hogs
| Posted on Wednesday, June 28, 2006 - 04:21 pm: |
|
Hey Henrik, Well with my eye and tape in hand I see 1" @ 1/16 ,Thought must be a better way,Got my Dial Indicaters out to check I wd. say 1 inch and a Hundred thousands, Guess my eye was Not too BAd still ( with glasses ) :-) Of course center to center,These are the two small mounting studs with the mirrors that Nut from the inside Correct?? |
Henrik
| Posted on Wednesday, June 28, 2006 - 08:49 pm: |
|
Thanks Chris. I appreciate you taking the time. Only 1" bolt spacing eh ...? Well that blows that idea out of the water The S2 mirrors have a 1 2/3" spacing approximately. I had wild ideas of swapping the somewhat short S2 mirrors with saggy mirror boots for the XB-R long stalk mirrors - I'd like to see more than my elbows Thanks again. |
Hogs
| Posted on Thursday, June 29, 2006 - 05:18 pm: |
|
Anytime Henrik, Glad I could help, Could ya not just drill another hole and still mount what you are trying to do? |
|