G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Don668 Posted on Tuesday, June 13, 2006 - 06:51 pm:        I would like to lower the shifter and rear brake on my 06 XB9SX, which I think is possible. The shifter looks like you loosen the two lock bolts on the barrel and turn it to shorten. Any trick to the brake lever? I'm fairly tall and its quite a stretch to get my foot on the brake from the peg. Any help would be appreciated.   99buellx1 Posted on Tuesday, June 13, 2006 - 10:52 pm:        The brake lever connects to a threaded rod, follow this up and you will understand.   Don668 Posted on Wednesday, June 14, 2006 - 12:00 am:        So basically your saying pull the cotter pin and spin the base up the threaded rod a bit?   Lovematt Posted on Wednesday, June 14, 2006 - 08:41 am:        On the rear brake the cotter pin can be removed to loose the lock nut and move the end up and down to adjust the lever position...be careful not to twist the rod that goes up into the switch. For the shifter do the same with the threaded rod between the lever and upper portion going into the case.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: