Author |
Message |
Flick
| Posted on Thursday, May 25, 2006 - 02:23 pm: |
|
I have an '03 XB9S and would like to remove my sidestand for racing, but am unclear about "re-wiring" the sidestand switch so the bike will start without it. Anybody done this? If so, detailed instructions would be helpful (I am an idiot when it comes to anything electrical!). I thought about taking it to the dealership, but, well, you know... |
Gowindward
| Posted on Thursday, May 25, 2006 - 04:39 pm: |
|
Per the 03' service manual the switch is to ground and is in an open when the stand is down. So all you should have to do is put a ground jumper wire from the wire coming into the switch to a good ground. |
|