G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Yeags30 Posted on Sunday, April 09, 2006 - 10:58 pm:        So i was out riding and my check engine light came on. It went on and off a few times...even flashed while i was riding home....I will check for the codes tommorrow....my oil was a bit low so i topped that off..Anyone else have these issues...my idle was all over the place and the fan kept coming on too   Cataract2 Posted on Monday, April 10, 2006 - 09:28 am:        Check the connections on your battery first along with any others you can find to make certain their tight. Without knowing what code it's sending this is hard to say.   Buellistic Posted on Monday, April 10, 2006 - 11:33 am:        CHECK THE BATTERY !!! You probably need a new one ???   99buellx1 Posted on Monday, April 10, 2006 - 02:25 pm:        I agree, that without knowing the code, everyone is just pissing in the wind. There are multiple sensors or short wires that could cause this.   Yeags30 Posted on Monday, April 10, 2006 - 02:56 pm:        ok codes are:13 for oxygen sensor and 14 for engine temp sensor....idle was up and down.... bike never stalled....Current setup is 03 xb9s with k&N filter, race ecm, d&D exhaust.Has 5300 miles on it. I cut i few intakes into the inner and outer airbox to get more airflow...these problems didn't start until after i cut the airbox...Oil was low so i added a few ounces....now what do you guys think?   99buellx1 Posted on Monday, April 10, 2006 - 03:14 pm:        I was thinking O2 sensor, if it is reading wierd it can make the bike run hot, which could make the fan run....etc. I would check the wires and connection to the sensor, and if it is still acting up check or replace it.   Buellistic Posted on Monday, April 10, 2006 - 03:31 pm:        You have nothing to lose by doing this so try it: Remove the negative battery terminal, then the positive battery terminal. Touch them together then put on the positive terminal then the negative terminal. Take it for a ride and let us know if it made a differance .   Yeags30 Posted on Monday, April 10, 2006 - 05:01 pm:        i think the bike got hot because the oil was low........i topped the oil off and rode it today and all seems fine...i did pick up a new 02 sensor in case the code comes back......just curious what does touch the 2 battery connections together do??   Yeags30 Posted on Monday, April 10, 2006 - 09:19 pm:        everything seems ok now...i took it out twice today and beat on it......everything seems normal   Reepicheep Posted on Monday, April 10, 2006 - 10:12 pm:        Check ECM wire bundle routing as well.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: