G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Earwig Posted on Sunday, April 02, 2006 - 10:37 pm:        I am replacing the clutch lever on my xb12s... should I use loctite/threadlocker on the nut & bolt? Thank you! (Message edited by earwig on April 02, 2006)   Ccemn1 Posted on Sunday, April 02, 2006 - 10:41 pm:        Just make sure you use the blue, and NOT the red! HOT TIP! I keep a bottle of Elmers glue in the shop & use that. Works just as well as the blue thread locker at a fraction of the cost!   Earwig Posted on Monday, April 03, 2006 - 01:13 am:        sweet, thanks... do you think I should even worry about using loctite on this piece?   Jkhawaii Posted on Monday, April 03, 2006 - 01:30 am:        I noticed the allen bolts tended to come loose so I use blue lock tight on them and check them once and a while   Ccemn1 Posted on Monday, April 03, 2006 - 09:44 am:        The way these things vibrate themselves apart, you have to use a locking agent on EVERYTHING!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: