| Author | Message | ||
     Isham |
What tool do you need to remove the axle? FSM says you turn it ccw 15 times or so to loosen it. | ||
| Skyguy |
If there is not a tool in the bad under the seat you can always do what I did. Go to Ace hardware and find a bolt/nut that fits. I spent about $2.00 and used a bolt and three nuts. The stock tool is only eight dollars but as usual my local glamor-bike/t-shirt dealer was going to take ten days to get one in stock. | ||
| Diablobrian |
the other trick is finding an appropriate spark plug socket (with a 7/8 hex on the end of it) and putting it on an extension backwards. | ||
| Ewulls01 |
does anyone know the size of the tension hex that is on the bottom of the swing arm? I'm going to measure and guess but I would rather know before I go and buy another tool. Thanks, Erik |
