G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Chizzler Posted on Sunday, February 05, 2006 - 12:15 am:        Hello All, I was just wondering, is the primary chain adjustment spec of (3/8"-1/2") the total slack? I measured mine by pushing down then pulling up setting it to just over 3/8". Was that right or was I just supposed to lift it and measure? Sorry for the dumb questions.... See ya, Nick   Cmm213 Posted on Sunday, February 05, 2006 - 10:34 am:        You are right its the total free play up and down 3/8-1/2" cold. Hot is 1/4-3/8" , also try to find the tightest part of the chain to take your measurement.   U4euh Posted on Sunday, February 05, 2006 - 12:07 pm:        Yes take measurements in several different rotated spots, then measure at the tightest.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: