G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Gotmine Posted on Monday, January 16, 2006 - 01:09 pm:        just like the subject line says....what is the best method for it. i bought the aerosol touch-up paint the other day and scored some parts off ebay that are gonna need a little paint. thanks   Raymondt Posted on Tuesday, January 17, 2006 - 11:05 pm:        I used white vinigar then some alcohol and it worked great. the paint has texture in it and dries flat with a perfect match. no issue what so ever.   Gotmine Posted on Wednesday, January 18, 2006 - 12:19 am:        so no sanding is required? that would definately make an easy job even easier!!   Stealthxb Posted on Wednesday, January 18, 2006 - 06:25 pm:        I always sand a surface before painting.   Gotmine Posted on Wednesday, January 18, 2006 - 08:07 pm:        so what process do you use? just a light roughing of the surface (with what grit)?   Stealthxb Posted on Thursday, January 19, 2006 - 01:13 pm:        just gradually work your way down to a smooth surface. normally a medium and a fine grit should be enough. after sanding clean with alcohol as Raymondt mentioned.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: