| Author | Message | ||
     Indy_bueller |
Is there anyone in North America that can get the HB Motors F.A.S.T. System? | ||
| Buellin_ri |
good question.  Like to get one myself. | ||
| Madsx |
Been trying to get prices from Bitz for Buells out of the UK but whenever ya click on item it says down for maintenance. Dont think Iron Machine is carrying Hillbilly-Motors products. | ||
| Thepup |
Why not make your own?Looks like a cone air filter and some heat shield material and you are ready. | ||
| Darktwin79 |
Contact Cory Rich at Ironmachine he should still be dealing with HB Motors J | ||
| Madsx |
Sorry my bad. I didnt see many hillbilly products on their site. But maybe Cory can get them for you if you want. | ||
| Martin |
If you get stuck I have a second hand one I could sell you.It might take a bit of time to post from UK but if it helps... | ||
| Martin |
Whoops I forgot, I also have a PC111 and O2 sensor to sell | ||
| Madsx |
Martin, Have you used it personally or had any experience with it you could share? | ||
| Indy_bueller |
Martin, I PM'd you. Ironmachine no longer sells HB stuff. I already asked. | ||
| Martin |
I fitted the FAST kit to my Euro XB9 and thought that it worked well once the ECU had adjusted itself. The PC111 was also useful for adding extra fuel at the top end once Buelldynoguy had et slip some set-up info (Don't let the cyl temps get too hot on the dyno etc)I have since fitted my own design of twin inlet which has put the fuel curve outside the adjustment parameters of the PC111 despite bigger injectors so I am going to try something else. | ||
| Indy_bueller |
Martin, send me a PM if you didn't get mine. Thanks! |
