G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » XBoard » Buell XBoard Archives » Archive through September 15, 2005 » XB12s, race ECM, stock air box with K&N and regular Drummer - will it do what I want? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Whiskeytango
Posted on Wednesday, September 14, 2005 - 10:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I want easy wheelies. Wheelies off the throttle. I bought my bike with the race kit already installed and even though the bike is still a blast to ride, it is nowhere near doing wheelies off the throttle with 215lbs of me on it's back! (disclaimer: I don't really want to ride around all day long on my rear wheel, but that's the kind of acceleration I bought this bike to experience!) Will the combo I listed in the subject line do the trick? I will add the TFI if I must, but I really don't want to (plus, my wife is preparing to murder me if I spent much more $$$). I know the difference is probably minute, but won't leaving my airbox stock (minus the snorkle) with the K&N help deliver more low-end torque, keep the bike from running lean and help alleviate the need for the TFI?
Thanks for looking,
WT
Top of pagePrevious messageNext messageBottom of page Link to this message

Ted
Posted on Wednesday, September 14, 2005 - 04:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I've read here, that xb12'ers either use the Race Ecm or the tfi, but not both...
The Drummer gives a bit more Omphf ,on lower rpm's.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kenny_v
Posted on Wednesday, September 14, 2005 - 04:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

The race kit with the muffler actually takes away some of the very low end grunt that the 12 has and increases it everywhere else , you can find dyno charts here somewhere ..
I have the same bike in a Firebolt ,ECM,muffler,air cleaner "race kit" and I'm around 170 , it will only lift unprovoked in 1st gear , but on the other hand if I want to ,I can make it come up NO PROBLEM in 2nd and click 3rd just before putting the front wheel down .
Top of pagePrevious messageNext messageBottom of page Link to this message

M1combat
Posted on Wednesday, September 14, 2005 - 05:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Mine will come up in first and second with the Drummer and race ECM but only when fairly close to sea level. Up here where I live, at 5000', it'll only come up at 3000 in first.

That's with not using the clutch or loading the front springs.

With the clutch it'll come up in first or second whenever I want.

I try to keep both wheels on the ground though. It's pretty rare to see me wheelie.
Top of pagePrevious messageNext messageBottom of page Link to this message

Nutsosane
Posted on Wednesday, September 14, 2005 - 05:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I will be installing Loud DRUMMER, tfi and k/n filter next week hoping to find the same roll-on wheelie performance
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonecharlie
Posted on Wednesday, September 14, 2005 - 06:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Put a real long wheelie bar on it,and it will come up anytime you want it to and maybe more. Just a though...........Charlie
Top of pagePrevious messageNext messageBottom of page Link to this message

Jerseybuell
Posted on Wednesday, September 14, 2005 - 07:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I have a race kitted 04 XB12S and don't have any problems popping wheelies ( I' don't do it often)..did i mention I was 145 lbs..hehe..sorry, whiskytango, just busting your jewels ; )
Top of pagePrevious messageNext messageBottom of page Link to this message

Jerseyguy
Posted on Wednesday, September 14, 2005 - 08:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

My XB9S with race ECM, K&N & Drummer will wheelie from idle right on up in first. I weigh 185lbs.

(Message edited by jerseyguy on September 14, 2005)
Top of pagePrevious messageNext messageBottom of page Link to this message

Whiskeytango
Posted on Thursday, September 15, 2005 - 12:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Jerseyguy,
That's what I want to hear. The TFI seems like too much work for me and I already have the race ECM installed. I just want to get it how I want it and then ride it! Thanks to everyone for your comments,
WT
Top of pagePrevious messageNext messageBottom of page Link to this message

Cochise
Posted on Thursday, September 15, 2005 - 12:58 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Race ECM, as Dave would say is plug and play. XB12Ss:Let my buddy take it for a spin (Race ECM, K&N, D&D) I heard that bike open and shut pretty quick, when he got back he was white as a sheet, he said he barely wristed it and the wheel came RIGHT up!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Brupska
Posted on Thursday, September 15, 2005 - 01:11 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I have a Drummer on my 12R and the front end and Kevin told me to get the most out of the Drummer on a 12. You will need to use the race ecm and the tfi unit. So the best person to ask is Kevin. I plan on adding the race ecm and the tfi this winter. Good luck Brupska
Top of pagePrevious messageNext messageBottom of page Link to this message

Whiskeytango
Posted on Thursday, September 15, 2005 - 01:33 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Cool. I can't wait to get my Drummer! On a side-note I just read about a piece of tuning software in another thread ("Coming soon tuning tool for Buell Motorbikes"; )that would make the TFI a lot easier to figure out if they are compatible. You could play around with different mods at home because it lets you do the TPS reset and clear error codes as well as many other cool tuning functions. I guess I don't have $285 for the software or $250 for the TFI right now anyway, so I'll have to "live" with just the exhaust for now and keep saving!
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration