G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Rarebird Posted on Monday, September 05, 2005 - 12:30 pm:        Is there any way to tighten the stock mirror on the post? I now have about a 1/2 inch of rotational freeplay when I adjust my left mirror... Very irritating when you have to plan for airflow to push the mirror to a "correct" position... Also, anyone know what the deal is with the stubby piece at the bar end of the mirror mount? I haven't taken them apart to really look yet, but is that an adapter, or is it used to lift the mirrors higher off the bar, or...? Thanks! -Mike   Lastcyclone Posted on Monday, September 05, 2005 - 08:11 pm:        The bottom of the mirror is threaded. Tighten that first, then tighten the nut that holds it in place. They should not move at all. No adapters.   Rarebird Posted on Monday, September 05, 2005 - 08:34 pm:        I may not have been clear... I'm talking about the actual mirror where it mounts to the TOP of the stalk. Are there threads at the top of the post, into the mirror? -Mike

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: