G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Reducati Posted on Friday, August 12, 2005 - 10:02 am:        do i need for the lock nut on the primary chain adjuster ( the big bolt under the engine?) thanks   Odie Posted on Friday, August 12, 2005 - 10:11 am:        Standby......   Monorad Posted on Friday, August 12, 2005 - 10:12 am:        I use a crescent wrench.   Reducati Posted on Friday, August 12, 2005 - 10:14 am:        also, it says to rotate the engine around to find the tight spot on the chain...should i tap the starter to rotate the engine, or?   Odie Posted on Friday, August 12, 2005 - 10:15 am:        7/8".....you will also need an allen wrench to actually adjust the adjuster. The nut is just what locks it in place once adjusted......   Reducati Posted on Friday, August 12, 2005 - 10:20 am:        thanks odie...also if you can see my second question above.   Odie Posted on Friday, August 12, 2005 - 10:27 am:        Red, just responded to your PM.....

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: