| Author | Message | ||
     Shazam |
anybody know the specs ie: gph,psi for the fuel pump? the flow rate of the injctors on an 03 xb offhand? info would be much appreciated. | ||
| Fullpower |
pressure: 49 psi volume : more than you will need dont have any clue as to injector flow rate, or duty cycle. | ||
| Diablobrian |
From what I understand the 05 fuel pump is upgraded in a few areas, the pickups are arranged so that it won't starve on hard acceleration if your tank is less than 1/2 full (like in sprint races) and it is supposed to have better flow rates. We just had the race bike upgraded due to fuel problems. I'm sure your beast of a motor would benefit. I also recommend stuffing in some fuel cell foam while you have the pump out. This should also help prevent fuel pump starvation. | ||
| Shazam |
I am looking for an external fuel pump for my riding mower project  hence the need for the specs....thanks FP | ||
| Martin |
Injector flow (03 XB9)is 295cc @ 42psi, which is less than the pressure the system works at. | ||
| Shazam |
thank you very much | ||
| Bruceclay |
the only time i have trouble is during hard deceleration when fuel is low. if i'm nearing reserve, i can kill the bike with a good fast stop. you know two fingers on the brake lever. |
