| Author | Message | ||
     Imblasted |
Somehow I’ve lost one of the metal clips that go onto the pod covers and the screws go into. Anyone know where to get some?  | ||
| Two_seasons |
Isn't that just a threaded clip that slides onto the part that you want to secure? I've found them at Home Depot. Make sure you know screw size and pitch. Another source might be Fastenal. | ||
| Imblasted |
Good call. McMaster/Carr it is | ||
| Coastrambler |
Several years ago Fastenal did not have those bolts. I believe they are 6X1.0, that's a 6mm diameter by 1 thread per mm. It's metric equivalent of SAE 1/4 X 20. Having a tap to chase threaded holes is highly recommended. | ||
| Imblasted |
No-Slip Clip-On Barrel Nut, Black-Phosphate Steel, M6 x 1 mm, 12 mm Hole Center to Edge https://www.mcmaster.com/95210A150 These look about right. I don’t actually want 25 of them though | ||
| Terrys1980 |
https://www.ebay.com/sch/i.html?_from=R40&_trksid= m570.l1313&_nkw=m6+clip+on&_sacat=0&LH_TitleDesc=0 &_osacat=0&_odkw=m6+barrel+nut+clip-on | ||
| Panshovevo |
I have a box of those, IIRC. I got them from McMaster-Carr several years ago. If you don’t find one, send me an address and I’ll send one as soon as I can get back in my workshop, which probably won’t be until the weekend, but I might be able to do it sooner. Divorce sucks. | ||
| Panshovevo |
Or however many you need. | ||
| Tribalreaper |
St.Paul Harley. Got some last year from there. |
