| Author | Message | ||
     Phwx2 |
What guage are the 3 yellow wires tbe coming from the stator into the bosch connector | ||
| Nuts4mc |
10 AWG...NAPA auto parts usually has a spool of 25 ft in yellow...they also carry connectors...if you're replacing a burned out section...try and solder the splice..it increases the reliability of the repair. | ||
| Coastrambler |
Soldering is a double edged thing. Where solder stops and wire is clear becomes a point susceptible to breaking if not properly covered. Vibration is the culprit. Crimped connectors avoid that problem. That said a soldered joint will never pull apart and is electrically the best. Ya takes yer chances. | ||
| Phwx2 |
Thanks guys. I didn't even get a chance to start either bike until the 4th of july and now both are running. 1125cr and xb9d. |
