| Author | Message | ||
     Ewok |
Haai guys en Maybe gurls  Have a problem !!driving yesterday En everthing was ok but 10 miles later the clutch lever becomes less squeezer!! And i can't squeez the lever at all, its stuck! Is this a normal problem OR AM i the first haha.. Hope You guys can help me.. Sorry for my englische hope You know what i mean thanx Great bike !!! Thanx for this great site | ||
| Willmrx |
Try loosing the bleeder valve to see if you can pull in the clutch lever. If you can, that would mean the master cylinder is problem okay. Check and see if the line it self has not been pinched some where. If it is all okay then it might be the clutch actuator cylinder binding up. #28 is the bleeder valve that you loosen to relieve the pressure. I hope that helps.  | ||
| Ewok |
Hello thanx for the reaction.. Is tried the bleeder valve en i can pull the lever in that's positife but when i loses the lever i have the same problem !a garage have 1000 miles i go a new Oberon clutch slave cilinder placed ..think that's not the problem ..fryday the going to check it. Iam curious what it is I let jou know Thanx |
