Author |
Message |
Panshovevo
| Posted on Sunday, April 30, 2017 - 10:34 am: |
|
Seems I remember seeing these on EBR's web site a while back, but they were out of stock. They apparently were removed from the web site at some point. Just to be clear, these were molded plastic (of some sort) , fit in the holes in the front of the fairing after the headlights are removed for racing. As I recall, they had lips around the perimeter so they could be fastened in place either with screws or pop rivets. Anyone know of a source? Anyone have a set to sell? Thanks, John |
Hybridmomentspass
| Posted on Sunday, April 30, 2017 - 02:08 pm: |
|
following this, also interested |
Nm5150
| Posted on Monday, May 01, 2017 - 11:56 am: |
|
I have a pair I bought so I could pull the head light assembly when I go to the track.They are permanently installed so I bought another fairing for the track.If I had it to do over again I would just buy a fairing for the track and use my stock one for the street.It would probably be cheaper too. |
99buellx1
| Posted on Monday, May 01, 2017 - 02:10 pm: |
|
In the direction Nm5150 was talking. http://catalystracingcomposites.com/c-326591-liste d-by-bike-buell.html Thought maybe they would have the fillers also, but they do not. Catalyst is what I have on my race bike. They offer both street and race products, they can probably make you something specific also. |
Panshovevo
| Posted on Wednesday, May 03, 2017 - 10:07 pm: |
|
^^^ Thanks. I have a set of their front, side, and belly fairings on my R, but they have the cutouts for the lights. I have a neighbor who is extremely talented with composites. I think I'll call in a favor, and have him make me some plugs. |
Ratbuell
| Posted on Thursday, May 04, 2017 - 08:18 am: |
|
Use your headlights to make the molds... |
Panshovevo
| Posted on Thursday, May 04, 2017 - 04:09 pm: |
|
Thanks. That's what I had in mind suggesting to him. |
Rodrob
| Posted on Monday, October 23, 2017 - 08:24 pm: |
|
I have a set, and race bodywork as well if you are still looking. |
Panshovevo
| Posted on Wednesday, October 25, 2017 - 03:24 pm: |
|
Rodrob, shoot me a message with what you have and what you want for it. |
Rodrob
| Posted on Monday, October 30, 2017 - 06:43 pm: |
|
PM's sent |
Rodrob
| Posted on Monday, October 30, 2017 - 07:34 pm: |
|
Posted more stuff here - http://www.badweatherbikers.com/buell/messages/21/ 817561.html?1509406388 |
|