| Author | Message | ||
     Dxg |
I know there are many ways to get lower pegs on a 1125r, but are there any stock-types, meaning with rubber inserts, not all metal? | ||
| Coastrambler |
Buell Firebolt 1" drop pegs work, with a little work. I'm using Knight Design 2" drop pegs. I do have to be careful of my feet when hauled over. They are all metal. Do help a lot and I have no complaints solid metal wise. They're a solid product. | ||
| Dannybuell |
The more upright XB Lightning Pegs Are 1" lower. the XB Firebolt pegs are the same height as oem 1125. | ||
| Nillaice |
I think there was some rubber over-molded pegs in the P&A manual, but good luck finding a set of those for sale. next best is the XB_S pegs if you want to have a 'stock' look. KD pegs are great and I think come on the 1190's, so I guess they are now 'stock' | ||
| Rpm4x4 |
I have Ulysses pegs. I love them. Its feels downright roomy | ||
| Froggy |
I'm trying to dig up a pic, but you might like the 2009/10 Ulysses footpegs. They changed the design on them, they are textured and are grippy. They have a 1" drop like the Lightning pegs. | ||
| Ratbuell |
...and they're black. Love mine. 6'4", 34" inseam, CR with clubmans, done more than a couple 800 mile days. | ||
| Froggy |
Here is a closeup of a later Uly footpeg. I'm not sure if it is what you want, but they are nice and grippy.   | ||
| Bubba_ |
I have those on mine.. they're nice  and look good imo plus, you can usually find a pair of these for much less than you'd pay for the after-market options. | ||
| Dxg |
Yes, those black Uly ones are my next best choice if I can't find any that look like the stock ones with rubber inserts. It's just that to me, all-metal pegs look like they belong on a dirt bike. (Message edited by dxg on December 19, 2016) | ||
| Nuts4mc |
look at a Suzuki V-Strom's pegs ( DL1000, I had a 2003 for awhile, great bike ) ...I don't know if they are lower, but you can buy just the rubber inserts (Bike bandit /Partzilla)...with a little machining you may be able to make them work with the Uly pegs.HTH | ||
| Javaman21011 |
Does anyone know if this brand https://www.revzilla.com/motorcycle/mfw-vario-pass enger-footpeg-mounts-buell-xb12ss would fit the CR? |
