| Author | Message | ||
     Jcmartin4 |
I have a 09 1125r and had the stator issue occur. Just sent in my stock rotor to Twin Motorcycles. Was wanting to know if replacing the stock VR is a "must do" or if it shouldn't be a problem after installing the new rotor mod? Any help, and with as much detail, would be greatly appreciated since I'm not as skilled mechanically as most of you. | ||
| Yankeerl |
I contacted EBR last year when i did my stator/rotor upgrade. they told me if everything else is working as it should, the stock vr would be fine. I still bought a replacement just in case. I think i spent around $120 for a new hotshot series from Rick's, which is cheap insurance for me in the BFE areas i ride. | ||
| Dennis_c |
I have Ricks hot shot with CE605 VR with about 20,000 miles all is good with heated grips, gloves,and jacket all on 13.9 to 14.V take off grips 14.2 to 14.4V |
