| Author | Message | ||
     Nillaice |
after this one I'm increasing my deposit on the tools (so that I can get another one if mine don't make it back to me in serviceable condition) I have not nor do I intend to charge a 'rental fee', I'm simply raising the refundable-deposit. the only cost will be shipping. | ||
| Icebear |
In need of a crankshaft locking tool... Sent you a PM but I'm not sure if it gone through.... | ||
| Nillaice |
my tool should be mailed out to Icebear today | ||
| Zac4mac |
"my tool should be mailed out to Icebear today" Careful what you say on the interwebs, Matthew.  Z | ||
| Icebear |
Thank you Matt! I really appreciate your help! | ||
| Nillaice |
 don't thank me until I actually go to the post office ;( ill make a point of it to send it out TODAY i'll text you the tracking #, too | ||
| Nillaice |
it went in the mail yesterday and Icebear says he'll have a long turn around time. | ||
| Mustang0 |
Does anyone have pictures of the tool with all the measurements. I'd like to make my own and possibly more for other members. Thanks in advance. | ||
| Levi |
I'd just like to second Mustangs request. I need a decent drawing to give my machinist if anyone has already drafted one. | ||
| Kinder |
this thread reminds me of the crankshaft custom tool I lent out to a fellow here under the condition he lend it out to the next person with the same conditions. Wonder if it is still making the rounds.... | ||
| Nillaice |
that'd be great if it kept going but the problem is it only takes one weak link in the chain for it to break. thanks for the bumb. i'll bug Icebear and see where he is with my locking tool. last he said he was leaving the country .... | ||
| Icebear |
I hear you...  I'm heading back on Sunday and bring my reworked rotor along with me... Hope I can do the fix during next week... Your tool will be on its way back to you soon...:-) | ||
| Icebear |
Finished the rotor work today and ran to the post office... :-) Your crank locking tool is on its way home.... USPS # 9505 5110 2087 5177 5857 77 Thanks again for helping me out... Guess I'm one of the last guys who had to fix the rotor... :-) Ride safe! | ||
| Nillaice |
Icebear's Deposit is refunded (minus my shipping costs and PayPal fees) via PayPal instant transfer. Icebear, Thank you for getting my tool back to me. I had a short window last month where I thought I'd be able to start working on my 1125 again and maybe ride it this summer but I've got to many other problems to address right now, and the bike is safely tucked away in the corner of my dads shop. Im just happy to help you get yours back on the road So in the mean time; Both my cam and crank locking tools are available for loaning to forum members. | ||
| Icebear |
Nillaice, it's on me to say thank you! You helped me out a lot and lending your crank locking tool is outstanding trust and confidence in me as a foreigner! I really appreciate what you and other forum members did and hopefully do for me and each other to keep our Buells alive and the brand unforgettable! Take care and ride safe! Michael | ||
| Mustang0 |
So nobody is willing to take measurements and supply the dimensions to make this? Guess I was maybe wrong about this forum. Mmmmm | ||
| Sprintst |
I'll throw a mic on one and post measurements | ||
| Sprintst |
Everything is in inches  (Message edited by sprintst on July 09, 2015) | ||
| Tq_freak |
Heres the one I made and works well  | ||
| Allanflstfi |
Is crank locking tool available believe I'm going to be replacing the Sprag clutch thank you | ||
| Nillaice |
Mustang0 I'll send my locking tool to you if you really want. I've been on this forum for only a few years, but You should show up to a homecoming or a March badness and actually meet some of us. Erik would be happy to shake your hand and sign your bike | ||
| Nillaice |
Allan, Yes it's available Check your inbox. You've got mail | ||
| Allanflstfi |
Nillaice I checked all in box I don't see pm I'll send you one | ||
| Mustang0 |
Thanks guys for the post back. Nillaice, thanks for the offer but I'm probably going to make one or more when I get time. I didn't know they still did a homecoming and never heard of March Badness. I really hope things work out for Eric. | ||
| Allanflstfi |
Nillaice please pm me directly allanzx6@gmail I can't find your pm | ||
| Jeepinbueller |
Might needed to be added to the list here for the crank locking tool. If you followed my whiney starter thread, I gotta get to my sprag goodness. Thought I could rent one from my local shop but they're extremely busy. | ||
| Nillaice |
I'm not sure if Allanflstfi borrowed someone else's locking tool or what. ive sent him a few emails and PM's, but heard nothing back | ||
| Jeepinbueller |
Gotcha, just thought I'd throw it out there. I'm trying to get my buddy that operates a manual lathe to whip one up for me in the meantime. If he can do a couple for cheap I'll have him do that and post up here. | ||
| Nillaice |
it sounds like you are ready to turn wrenches and at this point, I've got no clue what Allan's status is (he should have pinged me back by now) Jeepin Czech your inbox and reply back or PM me if you don't see anything | ||
| Nillaice |
I Sent it off to jeepin today |
