| Author | Message | ||
     1_wy_buell |
I have a 08 1125R w D&D and stock ecm. I found several tuned ecm's on idspd.com but not for D&D. Bike is sluggish at low rpm especially and seems to be hunting at idle. Anything known about idspd ecms? They also have a thing that sounds like it just adjusts fuel. | ||
| D_adams |
If you are referring to the Wego 3 wideband setup, it only logs the data. It does not automatically adjust your fuel tables. | ||
| 1_wy_buell |
I was referring to CMI lite, not Wego III | ||
| D_adams |
CMI Lite isn't for fuel adjustments, just clearing codes, etc. TBH, you'd be better off with a different exhaust and the ecm to match it. d&d's only real advantage was noise and the production of it. | ||
| 1_wy_buell |
Well I really don't want to spend more money on another pipe AND then ecm. What I'm really wanting to know is opinion of idspd tuned ecm or any experience with them. I like the look & sound of my D&D but mainly don't wanna spend hundreds of dollars on another pipe. I've already emailed idspd to see if they can get me a ecm tuned for my D&D | ||
| Thefleshrocket |
If the bike is sluggish and hunts at idle, I'd postulate that there's something else wrong with it rather than needing a tune. These bikes typically run pretty well with the stock tune and an aftermarket pipe. But if you think it's the exhaust without a tune that's causing the problem, switch back to the stock muffler (assuming you have it) and see if the problem gets better. I'm betting it won't. | ||
| 1_wy_buell |
Is Jardine tune same or very close to D&D? IDS is coming out with Jardine tuned ecm | ||
| Thefleshrocket |
I'm not sure how similar a Jardine tune would be to one for the D&D. If I recall correctly, the D&D either had the smallest gains over stock, or it lost power compared to stock. So, I'd wager that a tune for, well, anything other than a D&D itself, would be less than optimal. | ||
| Fresnobuell |
D&D is the worst performing pipe hands down. ..the only thing it's good at is make lots of noise. |
