| Author | Message | ||
     Purdyk |
My 1125R is showing signs of clutch problems. Haven't seen any weep but I've needed to bleed it very frequently and I'm always seeing bubbles. Just roasted the plates at the track last weekend. I'd really like to replace the actuator with the updated one from EBR, but with them being in receivership I've had no luck locating the part. Anybody know where I might find it? Located in USA, hoping to get it here within 3 weeks. | ||
| Sprintst |
I believe 5-Odro get get this part for you as well, if not ebay (yes, it's not the EBR part, but at this point, its a company that's in business when you need new orings and such, unlike EBR) http://www.ebay.com/itm/Oberon-Clutch-Slave-Cylind er-for-Buell-1125R-CR-2008-on-Black-Blue-NEW-/1510 11557780?pt=LH_DefaultDomain_2&hash=item2328fd8194 &vxp=mtr Another option, not sure if this is a "fix" or just better. As I recall, the EBR fix was stainless steel, but I could be wrong http://americansportbike.com/newdir/Item/18048A (Message edited by sprintst on May 15, 2015) | ||
| Snacktoast |
As I recall, the EBR fix was stainless steel, but I could be wrong On the EBR kit, the sleeve is stainless and the piston is Aluminum. | ||
| Purdyk |
Thanks for the recommendation Sprintst, That Oberon part looks like it will be perfect, not quite as cheap as the EBR part but I really just want to get my bike back in shape. I'm considering retiring the 1125r from the track and buying and just keeping it on the road, considering how difficult its becoming to find parts. | ||
| Zac4mac |
There were 3 options for the weep fix, all worked similarly well. Oberon, EBR and H-D p/n X2086.1AM Z |
